|
|
Delta 34-568 Miter Gauge Clamp
|
List Price: $70.66
Our Price: $41.89
You Save: $ 28.77 ( 41% )
Availability: Usually ships in 24 hours
Manufacturer: Delta
|
Average Customer Rating:  
|
|
Binding: Tools & Hardware
Brand: Delta
EAN: 0069554345685
Feature: Miter gauge clamp attachment
Label: Delta
Manufacturer: Delta
Model: 34-568
Publisher: Delta
Studio: Delta
|
|
|
Features
|
Miter gauge clamp attachment
Holds work securely for more accurate cutting operations
Attaches to Delta 34-895 miter gauge to clamp workpiece
Includes clamp bar, front and rear mounting posts, and 2 sliding clamps
Weighs 1.3 pounds shipped
|
|
|
|
|
|
|
|
|
Spotlight customer reviews:
|
Customer Rating:
Summary: pricy & not perfect
Comment: Not sure this is worth $45, but it does work well, and was easy to install on the Miter Gauge. The only problem is that the clamp rails are not parallel to the gauge. See my photo to understand. You would think that Delta could at least get the height of both bars the rails fit on correctly since it is THEIR Miter Gauge the clamp is made for...
Customer Rating:
Summary: Just what I needed!
Comment: This Miter Gauge Clamp is definitely what I have been needing. I cut many odd size and shape pieces of wood for scroll saw projects and this clamp helps me hold the boards square to the blade. It is also a great safety feature when you cut odds and ends like I do. It has probably saved me four times what I paid for it in being able to get the most from a piece of lumber.
Customer Rating:
Summary: 11 Stars and Counting
Comment: (...)
I just received this Delta Deluxe Miter Gauge #34-928. You wouldn't believe me if I told you how long ago I ordered it. I guess a fresh batch is in so order it quick. Now on to the item. When they say that it is accurate, the first thing I did, when I took it out of the box, was break out the Bosch Digital Protractor. It measures angles with a digital readout in tenths of a degree. (Equal to 3600 dots in a circle, no matter how small the circle) I put the miter gauge to the test. I clamped an aluminum level onto the face to extend the surface, and guess what? I got perfect readings after trying the detent stops, and even got the same results when I eyeballed a setting just using the pointer. It wasn't even off by a tenth of a degree.
At first I was confused, because some of the stops weren't right on the number, then I realized that they have stops at the popular detents, and some of those are in tenths of a degree.
Point number two is that I was impressed that the miter gauge bar that rides in your miter slot has little Allen bolts imbedded in it, so you can adjust it perfectly, to eliminate any play. When I put it in my Powermatic 66, it fit so perfectly, without any play, that I don't even need to fiddle with it. It is so snug that you would have to measure the play in thousandths of an inch, as in non-existent, yet it slides along the track like it was on greased wheels. It fit my Bench Dog miter track on their Router table extension for table saws the same way. The Might T track miter track guides had a little slop in it, but that is obviously the track and not the gauge. I guess you can tell where I will be using it. (Although the play is adjustable for any 3/4 x 3/8 track)
Point three is that the bottom of the gauge is polished so smooth that it will not scratch your saw tabletop. The front face of the gauge where you rest your work, looks like it was fine ground-polished with something like a 1000 grit wheel. You can see ultra-ultra fine lines going in a circle from where it was fine machined.
I strongly recommend that you also get Delta's clamp attachment that works with this gauge. The one that I bought is the 34-568 clamp assy, and it fits and works perfectly. Delta and Amazon feature the Delta cheapy miter gauge with the clamp as a combo package for about the same money as buying this Deluxe gauge and the 34-568 clamp assy as separate pieces. So for about the same money you are getting Delta's best, and in this example it is worthy of that title.
The gauge and clamp combo perfectly resolves the problem of when you are trying to cope the ends of your rails in a raised panel bit set. You know the problem, you have to hold that two-inch wide board and run the bit over the tip. Trying to get the bit to not move the board, by either pushing it a little away from the fence, or run into the second fence face causing a stop is a major accomplishment. Many use sleds with clamps on them, but then you are raising the work piece off of the table to make up for the sled base plate. With a router, that is a major consideration, because that oftentimes leads to having to raise the bit higher up out of the collar, causing more vibration and potentially a dangerous bit flying condition. This gauge and clamp combo locks it in just the same, but keeps the work piece flat against the tabletop. The other advantage to that is if you are running some larger pieces at the same time, you can do it by removing the gauge, and not have to change a bit setting. Wow! I'm getting off on this, I don't know about you. :-)
Another point is that the picture doesn't do it any justice. The fit, the finish, the accuracy of the deluxe gauge is better than any other miter gauge I have seen, even the one that came with the Powermatic saw. I can't recommend this high enough. Is it because it is a waxed Ferrari sitting in the garage? No, it is because it is as accurate and fine as a miter gauge can get. Buy one, you won't be sorry. Hope this helps.
Customer Rating:
Summary: Does what it says it will do
Comment: The clamp goes on well and holds on to material securely. The only draw back is that the size that will fit in the miter clamp is limited by the rails securing the hold down. Really not a flaw, just an inconvenience. Amazing how Delta stuff fits so well on Delta products.
|
|
|
Editorial Reviews:
|
Holds work securely for accurate miter and cut-off operations.
|
|
|
|
|
|
