|
|
Qual-Craft 2200 Pump Jack Steel Scaffolding
|
List Price: $109.60
Our Price: $65.74
You Save: $ 43.86 ( 40% )
Availability: Usually ships in 24 hours
Manufacturer: Qual-Craft
|
Average Customer Rating:   
|
|
Binding: Tools & Hardware
Brand: Qual-Craft
EAN: 0012643022004
Feature: Pump jack for low-cost, easy foot-operated jacking; secures to wood poles
Label: Qual-Craft
Manufacturer: Qual-Craft
Model: 2200
Publisher: Qual-Craft
Studio: Qual-Craft
|
|
|
Features
|
Pump jack for low-cost, easy foot-operated jacking; secures to wood poles
Pump Jack Platform accomodates two 2"x10" wood planks with toe boards attached
Rugged steel construction for strength, durable powder-coat finish to resist rust
Includes 1 jack; does not include wood poles
8 by 22-1/2 by 25 inches; 18.4 pounds
|
|
|
|
|
|
|
|
|
Spotlight customer reviews:
|
Customer Rating:
Summary: Homeowner Review
Comment: Homeowner review.
I have three of these set up on 24' long double 2x4 columns and have been using them for a week now. Here's my first impression:
- toss the included cotter pins into your parts bin and use removable clips. The whole system is designed to be put together onto the column - why they include cotter pins versus removable pins is anyone's guess.
- MAKE SURE your joints along the 2" sides of the 2x4 are smooth and without offsets. I had a 2x4 that wasn't cut perfectly true (from the factory) and the system kept hanging up on this when lowering it. It was only jutting out 1/16" too - nothing of concern when I built it. Next time I build the columns or before I use these again I'm going to run a belt sander along the edge to true it.
- The release mechanism to lower it is a pain in the butt to get to. No position you get into to be able to lower the unit is comfortable. But, it does work and I feel safe lowering it.
- Plan to tap the lowering level with a hammer to release it from the locked position. It's not always easy to move it from locked to unlocked for lowering, and more than once (but less than 1/3 of the time) I had to use a hammer to tap it out into position.
- The twist design needs updating. It's a VERY jerky ride down as the handle turns.
- The pumping process works as designed. However, as with lowering, make sure the column edges (where you can see the double 2x4) is smooth.
- The system needs guides to keep it centered. One of my columns (which were perfectly level when I set up) is gouged on the side because the pump jack "rivets" dug in when raising. It has about 5/8 of a gap on the sides of the jack, but nothing is there to maintain it in center. I am studying this now to see if there is something I can have fabricated to maintain center on my set.
I am raising my system within 40" from the top of the 24' columns. I didn't feel very comfortable with this height (my land slopes downward, so I had the height and the slope to look at, which compounded the height aspect a lot). Right now, I feel very comfortable at this height on this system, because:
- I added 2x4 "X" bracing to the bottoms of the columns. I don't lower the whole way down - I stop about 12' from the bottom and use a ladder to get me to a deck that's next to my work area.
- I added steel conduit channel (12 gauge) horizontal bracing above the "X" bracing. Overkill to be sure, but I'm not fond of heights and this added even more support to the "X" bracing. (this may be a mental stability thing - the "X" bracing was adequate, but.....)
- My scaffold is sturdy. I have two 2x10's, 12' long, with 5/8" plywood on the bottom side (to address the tension component of the bow weight will give to the 2x10's), and each 2x10 has 4" of 3M grip tape centered on them. They weigh a ton (each), but I feel very secure walking across the "bridge" and I built them to last me a lifetime.
I have the workbench attachments on my system as well. I use an aluminum scaffold on this and have been using my 8 1/2" sliding compound miter saw on it without issue. The 2x4's the workbench attachment uses for the safety railings really give me a sense of security since I know where the back edge is when I'm working.
Overall, I'm happy with this system. If I were to need it for my livlihood, I'd make some major design changes and would have a set custom built, but for homeowner or occasional contractor use, I'd buy them again.
Oh - it takes two people to put up the columns if you want to do it safely. They have some weight to them, even tho they don't look like they would. Too much weight to manhandle on a ladder (safely).
As I stated in the bracing review, there is no way I can find to have this system wrap around a corner. I have a need for this and will be building my own corner brace so I can put one of these jacks on the outside corner and laying "side B" scaffold on top of "side A" scaffold. I don't understand why a corner system wasn't produced by the manufacturer - it seems like a logical thing to have.
Customer Rating:
Summary: They barely work
Comment: Jacks were painted after assembly - which led to the parts jaming. Very difficult to get to work properly - often jammed and either wouldn't go up or wouldn't go down. Only instructions were on a sticker in micro font on the jack - could have used some pictures.
Customer Rating:
Summary: These things are a real pain to use
Comment: I bought a pair of these pump jack at Menards, a midwestern version of a discounted Home Depot. They were about $20 cheaper a pair. Anyway, although these things do save time instead of climbing up and down a ladder, they are a real pain to use. They keep getting stuck when I try to lower them, and they even get stuck when trying to raise them. I've experimented with them and found out that on one pump jack, I had to make sure the crank used to lower the jack must be pushed into the square hole as per instructions, while the other pump jack didn't work this way. It didn't matter if The crank was in the square hole or not. And then when I wanted to raise the jack again, I had to use a hammer to knock the crank back out of the square hole since it wouldn't budge no matter what I did. I also STRONGLY recommend using braces every 10 feet of pole height to give the setup more horizontal stability.
Customer Rating:
Summary: they got the job done on a two story house!
Comment: They work! The only problems with operation of the jacks was due to the poles. We sided a two story house with Hardy PLank. They supported 500 pounds of workers. Bottom line is - we got the job done...
If you scared of heights- it don't matter what you are standing on.
Customer Rating:
Summary: A little scary
Comment: These seem fine if your work only takes you up 5 to 10 feet. After that things get very shakey. My set needed repair straight out of the box and left me 15 feet up a couple times because it refused to move down. Only with a lot of struggle was I able to get it to release and get back to ground level. Spend the money on the better set up, full scaffolding or hire a contractor.
|
|
|
Editorial Reviews:
|
Steel construction. Adjustable to any height up to 30'. Your weight does the work. Raise or lower men and equipment. Held secure to wood poles with a Positive Double Lock System. Raise to position with foot pump and lower with crank. Must be used in stri Count compliance with Federal OSHA regulations. New York State Approval No. 4781.
|
|
|
|
|
|
