|
|
JET 708301K JWTS-10JF 10-Inch Right Tilt 1-1/2 Horsepower Contractor Saw with 30-inch Micro Glide Fence and 2 Steel Extension Wings, 115/230-Volt 1 Phase
|
List Price: $1,049.99
Our Price: $736.25
You Save: $ 313.74 ( 30% )
Availability:
Manufacturer: JET
|
Average Customer Rating:  
|
|
Binding: Tools & Hardware
Brand: Jet
EAN: 0662755715983
Feature: 10-inch right-tilt contractor table saw with 30-inch fence and 2 extension wings; 4,000 rpm
Label: JET
Manufacturer: JET
Model: 708301K
Publisher: JET
Studio: JET
|
|
|
Features
|
10-inch right-tilt contractor table saw with 30-inch fence and 2 extension wings; 4,000 rpm
1-1/2-horsepower; open-style stand; under-cabinet dust collection hood; 4/8-inch arbor
Heavy-duty cast-iron table; steel extension wings
Includes saw, stand, rip fence, 2 extension wings, dust port, blade
Table 27 by 20 inches; overall 36 by 56 by 42 inches; 260 pounds; 1-year warranty
|
|
|
|
|
|
|
|
|
Spotlight customer reviews:
|
Customer Rating: 
Summary: Great Saw Overall, but Entry Level Fence is Garbage
Comment: Smooth & quiet compared to the jobsite saws. Nice induction motor, sturdy stand with nice thick paint. The painted sheet steel wings are just as usable as the cast iron ones, so don't spend your money there. Spend your money on a better fence. This fence has a super-duper lock in the front, but a cheezy little one in the back. Not good when you need to push heavy pieces of wood against it. Basically, everything is good about this except the fence, but since the fence is the most important part of a table saw, I had to knock it down by two stars.
Customer Rating:
Summary: very good saw
Comment: For the price, this is a wonderful saw. My only regret is that I didn't get the cast iron wings.
This saw is plenty powerful, and quite good. I replaced the miter guage, and that has worked out nicely. The fence is adequate, but I always measure just to be sure.
I'm very happy with this purchase!
Customer Rating:
Summary: Great Saw out of the box....and for years to come
Comment: I bought my saw over seven years ago, before Jet changed to the white color. Aside from a few minor adjustments to the fence, this saw was flawless out of the box.
After dozens of jobsites cutting everything from pine to poplar to oak to MDF to framing lumber, this saw still performs like it was new. I have even had to chase away a mason who thought it would be fine to shove a cement covered 2x10 through. We build houses and additions and this saw is on the job from start to finish - framing, siding, exterior trim, interior trim and finish cabinetry. I still have it wired for 115 volts, and as long as I am on a short cord, I have never had a problem. A little steel wool and lubricant keeps the table and fence clean.
I decided to write this review while I was online shopping for another one. The only downside to this machine is that I can't have on two jobs at the same time. Dollar for dollar, this is the best tool on the job.
Customer Rating:
Summary: Excellent tablesaw for the price...
Comment: I picked mine up at Costco at a significant discount. This has performed well for me. The only change I have made to it is that I upgraded the standard V belt to a link-belt. The top was flat and the saw was easy to assemble and the vibration is non-existent. It passed the "nickel test" with flying colors. The fence is accurate and holds well. The miter gauge was pretty basic (to be expected). I replaced mine with an Incra V-27. The only other downside is that it will bog down a bit when ripping VERY thick wood (2" plus).
Very satisfied with this saw.
Customer Rating:
Summary: Your work is only as good as your tools.
Comment: I'll leave all of the more technical, and overwritten reviews for "the professionals", and say only that it is an absolute pleasure to own and use this machine. I'm slowly replacing all of the junk hand-me-downs I used to use, and to now have a tool that causes an audible "AHHH HA HA HA!" after a cut makes the work fun as well as accurate. There are much better machines at much higher prices, and if you can afford them go for it, or if you are a Norm Abram type "puhfectionist", look at the ultimate top of the line. For the rest of us small shop, small budget users, you won't be dissapointed with this tool.
As far as JET is concerned, well my experience with customer service over a different item has left EVERYthing to be desired. Unfortunately. But it still doesn't taint this saw.
|
|
|
Editorial Reviews:
|
Extruded aluminum front guide rail allows 30" rip to the right and 12" to the left; Exclusive design 30" Micro Glide Fence, a quick release precision T-square type rip fence; Under-cabinet dust collection hood includes a 4" diameter hookup; Completely pre-wired, including a unique quick-connect motor-to-switch plug for easy setup; Totally enclosed fan cooled motor includes overload protection and is UL listed; Finish ground, heavy-duty cast iron table with T-style mitre gauge slots and beveled front edge; Extra heavy-duty trunnions support a cast iron blade arbor housing featuring two precision ball bearings
|
|
|
|
|
|
