|
|
Bosch 11255VSR BULLDOG Xtreme 1-Inch SDS-plus D-Handle Rotary Hammer
|
List Price: $463.00
Our Price: $200.00
You Save: $ 263.00 ( 57% )
Availability: Usually ships in 24 hours
Manufacturer: Bosch
|
Average Customer Rating:  
|
|
Binding: Tools & Hardware
Brand: Bosch
EAN: 0000346345582
Feature: 7.2 Amps
Label: Bosch
Manufacturer: Bosch
Model: 11255VSR
Publisher: Bosch
Studio: Bosch
|
|
|
Features
|
7.2 Amps
2.2 ft. lbs of Impact Energy
Length: 17.25"
0 - 5,800 No Load BPM
0 - 1,300 No Load RPM
|
|
|
|
|
|
|
|
|
Spotlight customer reviews:
|
Customer Rating:
Summary: Great entry level rotary hammer
Comment: I tried to drill some 1/2" holes in poured concrete foundation using a regular drill and brand new masonry bit. After 15 minutes of difficult drilling, the hole was barely 1/4" deep. So I picked up a Bosch 11255 rotary hammer, and it drilled 4" deep holes in under 1 minute. I was amazed at how fast a rotary hammer goes though concrete. Great tool.
When I bought mine, it came free in the box with some Bosch electronic metal/pipe finder tool. Have not used that yet.
Customer Rating:
Summary: Great rotary hammer
Comment: the Bosch is the best I've used of this type of tool. As far as the review concerning Bosch's describing this as "1 inch". It means that this will drill up to a 1 inch diameter hole in concrete ( and the model down from this will drill a 7/8" dia.). Bosch includes this information in their specifications.
Customer Rating: 
Summary: 1 Inch? I don't think so....
Comment:
What on this thing is 1"?
Nothing.
It does NOT take a 1" bit.
It does NOT have a 1" chuck.
In fact, there is no chuck. Only their weird SDS bits, whatever those are.
Don't be fooled. You need to buy an addition bit unless you want to use their own bits (read: more expensive), or their own bit adapter.
Bosh: Get your stuff together and quit the false advertising.
Customer Rating:
Summary: drilling granite
Comment: This drill, equipped with a DeWalt bit, drills into granite in a manner that is hard to believe for such a light and easy to use tool. The granite here on Cape Ann has been sent all over the world, and it is hard! Ordinary concrete is much less of a challenge. Highest recommendation.
Customer Rating:
Summary: Lots of Holes Without Beating You Up
Comment: We found we had termites and the applicator told me I could save $$ by drilling 1/2" holes at 12" intervals in the concrete of the porches, patio and sidewalks that surround my house instead of paying him to do it. The cost of the drill and three bits was a little less than half of what I am saving, and I'll end up with a good hammer drill when I am done.
I've drilled holes in 299 locations so far and have a few more to drill once I move a couple of heavy items. The concrete has been 5-8" in depth on average and a few holes didn't break through even when the 12" long bit was completely buried in the concrete.
The drill makes holes quickly and smoothly. It doesn't beat you up, and the drilling speed is about the same (quick) whether you use very light pressure or really put your weight on it, so take it easy and let the drill do all the work. I did quench the bit in water between holes since I was using the drill continuously for a couple of hours at a time. I never felt the drill was getting too hot, but the bit sure sizzled when it got into the water.
The first 1/2"X12" bit lasted for a little over 160 holes, and I expect to finish the job while still on the second bit. I'm looking forward to getting a couple of chisel bits and using them to break out a bathroom floor I need to get to and have been putting off.
Great tool; I'm glad I had an excuse to buy it.
|
|
|
Editorial Reviews:
|
1" SDS Plus Rotary Hammer, Bulldog Extreme, 7.2A Motor, 3 Mode Selector Easily Converts From Rotation Only To Rotary Hammer To Hammer Only Modes, Integral Clutch Helps Minimize Torque Reaction, Variable Speed Trigger, Patented Rotating Brush Plate Equal Power In Forward & Reverse, Cord Turret Allows Cord To Pivot 360 Degrees.
|
|
|
|
|
|
