|
|
Denali 14-Inch Digital Protractor With Laser and Carrying Case
|
List Price: $49.99
Our Price:
You Save: $ 49.99 ( 100% )
Availability:
Manufacturer: Denali
|
Average Customer Rating:  
|
|
Batteries Included: 1
Batteries: 4
Binding: Tools & Hardware
Brand: Denali
Feature: Digital laser protractor; includes horizontal and vertical bubble level for use as level
Label: Denali
Manufacturer: Denali
Publisher: Denali
Studio: Denali
|
|
|
Features
|
Digital laser protractor; includes horizontal and vertical bubble level for use as level
Easily transfers miter angles with no calculations necessary; computes angles accurately to +/- 1 degree
High-quality anodized aluminum body with a large easy to read LCD screen
Laser is stored inside the level and is easily mounted when needed
Includes protractor and carrying case
|
|
|
|
|
|
|
|
|
Spotlight customer reviews:
|
Customer Rating:
Summary: seems like a quality build.
Comment: The Denali angle finder is excellent for what it does and the price is minimal. The accuracy is right at .1 of a degree due to the plastic fulcrum is a hair too thick. The angle LED will always show .1-.3 of a degree when fully close because of the minor issue stated above but will show zero if folded and held tightly (calibration according to the owner manual does not help to zero it). It constructed with mostly high grade alluminum with nice carrying case included. It will be better if
Denali makes this thing a little thinner and smaller with positive angle lock mechanism plus miter/bevel angle calculation built in like the Bosch does(this miter/angle table can be downloaded from the web! minor issue). All in all it is a great tool for every day usage with fairly high accuracy(i.e. crow molding)without the super high degree of accuracy called by some project. Happy with the purchase and highly recommended.
Customer Rating:
Summary: 14" Denali protractor
Comment: This protractor would work excellent for a carpenter, welder,... however,
it is not quite accurate or the repeatability is not good enough for a machinist.
Customer Rating:
Summary: Good value
Comment: After researching similar products, I bought this based on price. I found it to be very useful when using it to get the angle needed to finish my stairs. The laser could have a better magnet (tended to fall off). The only drawback I see after using it (compared to the $200 + models)is that you have to read the digital readout and keep it, because the "arm" will not stay open (screw won't tighten). It needs to have a better way to "hold" the angle. But, great product for the cost!!
Customer Rating:
Summary: Another piece of junk from far far away.
Comment: Really disappointed with this product. It will NOT zero using the manufacturer's instructions and is so big it is awkward to use. Of course "14 inch" is in the name of the product so I should have noticed that. I thought the name 'Denali' meant quality, but not so in this case. On a positive note, the case is nice.
Customer Rating:
Summary: DO NOT BUY - DID NOT WORK
Comment: I bought two of these protractors for my husband as a gift. I returned the first one because it never worked out of the box. The replacement didn't work out of the box either. I will not order a third. Junk.
|
|
|
Editorial Reviews:
|
|
Take the guesswork out of measuring, marking and reading angles—no tricky geometry or complicated calculations required—with the Denali 14-Inch Digital Angle Protractor. Simply swing open the tool’s pivoting leg and immediately read the angle on the digital display window. The tool is accurate within 1 degree, and will read angles ranging from zero to 185 degrees. The anodized-aluminum protractor is also fitted with two bubble vials for use as a conventional level. The Denali 14" Digital Angle Protractor is equipped with a laser that is cleverly stored inside the protractor's body. Laser is easily mounted to the swing arm via magnets when needed. It’s powered a single 9-volt battery (included) that typically lasts about 100 hours of normal use. The tool comes with a protective carrying and storage case. The protractor provides a quick and precise way to read existing angles, such as roof slopes, wall corners, handrails, and mitered trim work. You can also use it to mark any desired angle up to 185 degrees. It’s an indispensable tool when installing crown molding; use it to determine the angle of outside corners, which are rarely 90 degrees. This versatile tool will also do many of the jobs typically reserved for a sliding T-bevel square. And if all that weren’t enough, the Denali Digital Angle Protractor costs about three times less than any comparable tool on the market. -- Joseph Truini The Denali Story
Named after the tallest mountain range in North America, Denali tools stand above the rest in providing an exceptional blend of quality craftsmanship, professional-grade features, and customer value. All homeowners, hobbyists, do-it-yourselfers, and price-conscious contractors will appreciate Denali’s design and functionality. Denali products compliment one another and will be an indispensable and long-lasting addition to any home or workshop. Our products undergo rigorous third-party testing to ensure high performance standards. Denali tools are available exclusively on Amazon.com.
|
|
|
|
|
|
